Kenly Metro Station is one of the expeditions you can attempt in Tom Clancy’s The Division 2.
Each expedition has at least three different tasks and it’s only available in the Public Test Server at the moment.
Here’s a walkthrough of Kenly Metro Station (Large Chemical Tank) in Division 2.
To begin an investigation, you need to start the Echo and choose one of them.
I chose Large Chemical Tank for this walkthrough.
Secure the metro
Your first objective is to head to the metro.
As you arrive, you’ll see plenty of hostiles. Secure the area by killing them all.
Expose the chemical tanks
At the middle of the metro, you should see a container holding the chemical tanks.
To expose the tanks, you can probably shoot at the circuits on the container. I don’t recall what my teammates did for this one.
Destroy the chemical tanks
Once it’s exposed, destroy the chemical tanks by shooting at them.
There are two tanks here. You should see the HP bar of both of these tanks.
While destroying the tanks, you will be attacked by many hostiles.
Take out both the tanks and the hostiles.
Search for the control room
Look around the metro for the control room. If not mistaken, it’s on the higher floor. Interact with the terminal.
Reset the correct system fuses
As the terminal doesn’t work properly, you need to reset the fuses. After resetting them, you need to restore the power grid by interacting with the terminal.
You need to get the correct order.
I’m not 100% sure about this but I tried re-wiring the fuse at the “A” side first, and then pulled the lever at the “C” section.
After doing that combination, go back to the terminal and try rebooting the power grid.
If it works, then great.
Vent toxic gas
Once you’re done, head to the Silo area.
You need to vent the toxic gas via 3 different control panels.
At the same time, you will be attacked by many hostiles, including hammer-wielding lieutenants.
Return to Echo
After the area is secure and the toxic gas is gone, go back to the Echo to complete the job.
Wait for your agents to arrive and reactivate the Echo.